Washer Repair San Marcos

If you see the error code NF or 4E on your Samsung washer, this is an indication that it’s not filling with water.

• Make sure washer door is shut tight
• Check power source and ensure solid connections
• Check water pressure to washer
• Clear water hose and mesh filters

A clogged filter can lead to a washer not filling with water issue. Clean debris from the filters when you clean the inside of your machine monthly.

If you still find yourself in need of washing machine repair, contact us. We look forward to getting your laundry room back in action.

If your washer won’t spin properly, there could be many things causing the problem. Here are some of the most common causes:

Defective Lid Switch Assembly:
A defective lid switch assembly could be behind your washer not spinning properly. This assembly prevents your washer from spinning while the door is open. The washer will not spin if the lid switch assembly fails.

Loose Drive Belt:
If your washer won’t spin properly a loose drive belt could be to blame. The drive belt inside your washer works with the pulley to help the washer spin during a cycle. The washer may not spin if the drive belt is loose or broken.

Motor Coupling Failure:
A motor coupling failure could also be the cause of your washer not spinning. The motor coupling connects the washer’s motor to its transmission, protecting both from an overloaded washer. If the coupling senses an overloaded washer, it will break to prevent any damage to the motor or transmission.

Broken Door Latch:
Another potential cause of a washer not spinning could have to do with a broken door latch. The door latch secures the washer door shut while it is running. If the washer doesn’t spin properly the door latch may be broken as the washer will only run if the door is full sealed.

There are many potential reasons that your washer is making loud noise. These are some of the common ones:

Defective Tub Bearings:
Defective tub bearings could be to blame if your washer is making loud noises. The washer’s tub bearings allow the inner tub to keep spinning smoothly and noiselessly. If the tub bearing is defective, it is recommended to replace the outer tub and bearing.

Broken Tub Seal:
If your washer is making a loud noise, a broken tub seal could be causing the problem. The tub seal is the primary water seal in the outer tub. If this breaks water could leak out, causing some of the noisy sounds you may be hearing.

Cracked Drive Pulley:
Another reason your washer may be making noise is a cracked drive pulley. The drive pulley works with the drive belt to help the washer’s tub spin easily. If it is worn-out or broken, it could be causing the noise in your tub.

Worn-Out Clutch:
A worn-out clutch could also be behind your washer making loud noises. The clutch assembly establishes the connection between the transmission and the inner tub, allowing your tub to gradually get up to a proper spin. If it wears out, it could make loud noises during cycles. Call a washer repair professional for clutch replacement.

When your washer won’t drain properly, it may be caused by one of the following common problems.

Clogged Drain Pump:
A clogged drain pump could be preventing proper drainage in your washer. Your drain pump helps drain the water out of your washer. Small items or articles of clothing can get caught inside the pump or hose, clogging the drain. We recommend removing the pump and checking inside for obstructions.

Overfilled Coin Trap:
If your washer won’t drain properly an overfilled coin trap may be to blame. Coin traps catch foreign objects that enter the drain. If they are not cleaned out periodically, the debris will build up and clog the coin trap making it harder for water to drain properly.

Door Lock Motor Failure:
A door lock motor failing to work properly could be to blame if your washer isn’t draining. Your door lock motor secures the washer door shut while it is operating and if it fails it may be hard for your washer to drain. Check to see if the door lock is damaged and call professional help as needed.

Broken Lid Switch Assembly:
Another reason your washer may not be draining could have to do with a broken lid switch assembly. The lid switch assembly in your washer prevents your washer from spinning while the door is open. if it breaks the washer may not be able to drain effectively.

If your washer is vibrating or shaking while washing, one of these common issues may be to blame.

Worn-Out Shock Absorber:
If your washer is vibrating or shaking, the shock absorbers could have worn-out. These absorbers help absorb the vibrations your tub releases as it is running. Sometimes, your shock absorbers can separate if you’ve recently moved it to a new location. We recommend checking to make sure the absorbers are in the right location and aren’t worn-out or damaged.

Broken Suspension Rod:
A broken suspension rod could be behind your washer vibrating or shaking. The suspension rod in your washer helps work to dampen the movement of your washer during a wash. Check your rods to make sure they aren’t broken.

Counter-Balance Spring Failure:
Another reason your washer could be shaking is a counter-balance spring failure. This spring inside your washer helps to absorb your washer’s movement during a cycle. Check the springs for damage and the frame they are attached to for rust.

Worn-Out Snubber Pad:
If your washer is shaking or vibrating, the snubber pad could be worn-out. The snubber pad softens the vibrations from the washer tub. The pad could be worn-out or covered in a sticky substance like detergent, preventing it from working properly. A damaged snubber pad will need professional replacement.